Engineering
Precision
By Design.
From concept drawings to simulation-validated production parts — our design and development team applies cutting-edge technology and foundry expertise to every component we engineer.
Where Design Meets Industrial Reality.
Chenab Engineering Works has built its design and development capability over five decades of applied manufacturing experience. We don't design in isolation — every drawing, model, and simulation is grounded in the real-world constraints of foundry production, materials science, and client application. The result is components that perform exactly as intended, first time, every time.
From Concept to Production-Ready Designs
Our design and development department handles the complete engineering lifecycle — from initial client brief and feasibility study through to validated, production-ready drawings and tooling specifications.
Using industry-leading CAD tools and casting simulation software, our engineers ensure every component is optimised before a single mould is prepared, eliminating costly rework and reducing lead times significantly.
- 3D parametric CAD modelling (SolidWorks, AutoCAD)
- Reverse engineering from physical samples or drawings
- Design for Manufacturability (DFM) review
- Tooling and pattern design support
- Full GD&T engineering drawing packages
What We Do & How We Do It
| Capability | Available | Software Used | Turnaround | Output |
|---|---|---|---|---|
| 3D Parametric ModellingCAD Design | SolidWorks, AutoCAD | 3–5 Days | STEP, IGES, DWG | |
| Reverse EngineeringFrom Physical Sample | CMM + CAD | 5–10 Days | Native CAD Files | |
| Solidification SimulationCasting Analysis | MAGMASOFT / ProCAST | 2–4 Days | Simulation Report | |
| Finite Element AnalysisStructural Validation | ANSYS | 3–6 Days | FEA Report + Model | |
| Tooling & Pattern DesignFoundry Support | SolidWorks + Internal | 7–14 Days | Pattern + Drawings | |
| GD&T Drawing PackageEngineering Documentation | AutoCAD, SolidWorks | 1–3 Days | PDF + DWG Package |
Failure-Proof Before the First Pour
We invest heavily in solidification simulation and Finite Element Analysis — allowing our engineers to predict shrinkage, porosity, stress concentrations, and thermal distortion before any physical production begins.
This simulation-first approach has resulted in significantly reduced defect rates, shorter prototype-to-approval cycles, and higher confidence in every casting that leaves our facility.
- Solidification & filling simulation (MAGMASOFT / ProCAST)
- Finite Element Analysis (ANSYS)
- Gating & riser system optimisation
- Thermal stress and distortion prediction
Our Development
Process
A structured five-step methodology that takes every project from initial brief to production handover with zero ambiguity.
Concept & Analysis
Requirement gathering, feasibility assessment, and initial concept scoping with the client engineering team.
Design & Modelling
Full 3D parametric CAD modelling, detailed drawings, and DFM review for manufacturability.
Simulation & FEA
Casting solidification simulation, stress analysis, and gating optimisation before prototype.
Prototyping & Approval
First article production, CMM dimensional inspection, and client approval sign-off.
Production Handover
Process documentation, tooling handover, and serial production launch with full QC protocol.
A Commitment to Continuous Innovation
Scientific techniques and rigorous quality control have always been at the heart of our operations. We maintain dedicated sand testing, metal analysis, and mechanical test laboratories — all integrated directly into our design workflow.
Our R&D partnerships with international institutes and national academic institutions ensure we remain at the frontier of casting technology, materials science, and sustainable manufacturing.
Engineering Stack at a Glance
| Tool / Software | Category | Primary Use | License Type | Status |
|---|---|---|---|---|
| SolidWorks | 3D CAD | Parametric modelling, assemblies, drawings | Commercial | Active |
| AutoCAD | 2D Drafting | Engineering drawing packages, GD&T | Commercial | Active |
| MAGMASOFT | Casting Simulation | Solidification, filling, porosity analysis | Specialist | Active |
| ProCAST | Casting Simulation | Thermal & filling simulation | Specialist | Active |
| ANSYS | FEA / Structural | Stress analysis, thermal distortion, fatigue | Specialist | Active |
| CMM (In-House) | Dimensional Inspection | First article inspection, tolerance verification | Hardware | Active |
| OES Spectrometry | Material Analysis | Chemical composition verification of alloys | Hardware | Active |
Tractor Parts Catalogue
Precision-engineered cast iron and machined components for Massey Ferguson, Fiat, and New Holland tractors. Explore our complete product range below.
Ready to Build
Something Precise?
Partner with Chenab Engineering Works for precision design, simulation-validated castings, and world-class production support.